- Capacitors[10]
- Plastic Film[10]
- Contact Person : Ms. Zhao Maggie
- Company Name : Taizhou Flyda Electronics Co., Ltd.
- Tel : 0086-576-86340938
- Fax : 0086-576-86332677
- Address : Zhejiang,Wenling,Injection Park, Daxi Town
- Country/Region : China
- Zip : 317525
Related Product Searches:BKMJ capacitor (Y connection),High Quality,BKMJ, BKMJ capacitor,BKMJ capacitor (Y connection)
Service condition:1. Altitude: Applied in the area under 2000 meters2. Residual voltage in service: Under 10% of rated voltage3. Service area: There's no conducting dust and corrosive gas in the service area..
Technical indicators1. Rated voltage: 230V, 400V, 415V, 450V, 525V, 690V.2. Rated frequency: 50/60Hz.3. Insulation: Between terminal: 2.15Un, 2 seconds; None permanent arc over. Between pole and shell: 3KV, 10 seconds; None arc over.4. Capacitor deviation: ± 5%. ± 10%; The ratio of the maximum capacitor and minimum capacitor between random two terminals in three-phase product should not exceed 1.08.5. Tangent of loss angle: ≤ 0.2%6. Top allowable overvoltage: 1.10Un7. Top allowable overcurrent: 1.3In8. Discharging performance: There's discharging resistance in the product. After the break of capacitor, residual voltage would drop to 50V or below 9. Standard: Complied with GB/T 12747-2004 and IEC60831-199310. Type designation
Features of BKMJ (Y connection)
1. Beside commonly protective function, the product possesses particular designing, thus radically eliminates phase short circuit failure caused by arc over. The product has the best security performance.
2. Could be conveniently changed into single-phase product with 3 times capacity. Thus increases the capacity level.
3. Neutral point is fetched out; each phase of three phases could be running separately. It is excellent product for precisely dynamic compensate of system.
4. Breach low voltage bound, be suited for 1.14 KV compensate of oil field.
Capacity and Dimensions of BKMJ Series
Rated capacity (Kvar) | Drawing NO. | Shell length L1 | L2 | L3 | Shell Width B1 | B2 | Shell height H1 | H2 | Mounting hole |
1~5 | C-1 | 190 | 214 | 238 | 66 | 44 | 140 | 174 | φ6*9 |
6~10 | C-2 | 190 | 214 | 238 | 66 | 44 | 180 | 214 | φ6*9 |
11~15 | C-3 | 190 | 214 | 238 | 66 | 44 | 200 | 234 | φ6*9 |
16~25 | D-1 | 190 | 214 | 238 | 130 | 94 | 200 | 237 | φ12*16 |
26~50 | E-1 | 328 | 358 | 388 | 130 | 94 | 270 | / | φ12*16 |
55~60 | E-2 | 328 | 358 | 388 | 130 | 94 | 360 | / | φ12*16 |
Note: The shell dimensions of single phase product is identical to three phase product.
BKMJ capacitor (Y connection)