capacitor BZMJ/BSMJ (Cylinder)

BZMJ/BSMJ Provided with aluminum shell that protect from rust. Protected from explosion,the products have better security.

Service condition:1. Altitude:Applied in the area under 2000 meters2. Residual voltage in service: Under 10% of rated voltage3. Service area: There's no conducting dust and corrosive gas in the service area..

Technical indicators1. Rated voltage: 230V, 400V, 415V, 450V, 525V, 690V.2. Rated frequency: 50/60Hz.3. Insulation: Between terminal: 2.15Un, 2 seconds; None permanent arc over. Between pole and shell: 3KV, 10 seconds; None arc over.4. Capacitor deviation: ± 5%, ± 10%; The ratio of the maximum capacitor and minimum capacitor between random two terminals in three-phase product should not exceed 1.08.5. Tangent of loss angle: ≤ 0.2%6. Top allowable overvoltage: 1.10Un7. Top allowable overcurrent: 1.3In8. Discharging performance: There's discharging resistance in the product. After the break of capacitor, residual voltage would drop to 50V or below 9. Standard: Complied with GB/T 12747-2004 and IEC60831-199310. Type designation

Features of BZMJ and BSMJ (Cylinder)1.Smallest scale in like products2.Provided with aluminum shell that protect from rust3.Protected from explosion, the products have better security4.Installed with single bolt, it is very convenient

Note: The shell dimensions of single phase product is identical to three phase product.

Capacity and Dimensions of BZMJ and BSMJ Series (Aluminum shell)

Rated capacity (Kvar)	Drawing NO.	φ(mm)	H1(mm)	H2(mm)	M(mm)
1~2	B~1	45	120	140	10
3~4	B~2	55	120	140	10
5~6	B~3	65	150	170	10
7~9	B~4~1	76	150	170	10
10~12	B~4~2	76	180	202	10
13~15	B~5	86	180	210	20
16~20	B~6	96	180	210	20

capacitor BZMJ/BSMJ (Cylinder)